|
Compax Inc.
1210 N. Blue Gum St.
Anaheim, Ca 92806
|
Tel: (714)630-3670
Fax: (714) 632-1344
Email: earl@compaxinc.com
|
Precision powder metallurgy company
that has been providing quality Powder Metal components for over 40 years.
Website for Compaxinc.com and Powdermetal.com
1) Blending
Metal powders are first mixed with lubricants and/or other
alloys to produce a homogeneous blend of ingredients. Often the
blending is done by the metal powder producer.
2) Compaction
The powder is gravity-fed into the die and is usually compacted at
room temperature. The most common compacting pressures are in the 30 -
50 tons per square inch range. Compax, Inc. has automated pressing
equipment ranging from 4 - 250 tons.
3) Sintering
During sintering the pressed parts move through a controlled-atmosphere
furnace. The pressed powder particles fuse together, forming
metallurgical bonds. Compax, Inc. has high temperature sintering
capabilities up to 3000 degrees F.
4) Secondary operations
Compax, Inc. can provide the part with a variety of secondary
operations including grinding, impregnating, drilling, tapping,
repressing and reaming.
5) Design
Compax, Inc. designs all tooling required to produce a part to customer specifications.
Gears, cams, counterweights, armatures, pole pieces, bearings, bushings
Back to top
|
|
Secondary Operations
In-house quality assurance
and metallurgical inspection
Requests
hosted by WebIncome.net
|